1-Turn on GSK980TD/GSK980Tda/GSK98TDb CNC controller
2-Press "Setting" key to enter the parameter switch.
3-Press “L” key to turn the parameter switch, after that there will be an alarm.
4-Press both "Reset" key and ""Cancel key synchronously to remove the alarm.
5-Press "MDI" key to enter the MDI mode.
6-Press the "Parameter" key to enter the parameter setting.
7-Press “P”, “1” “8” “4” keys, to find the parameter 184.
8-Change the Bit0 from 0 to 1
9-Press the "Input" key.
10-Turn off the power.
11-Restart GSK980TD/GSK980Tda/GSK98TDb CNC controller, done. |
 |
 |
Add us to your favorites |  |
Make us your homepage |  |
Language
|
